Simplified Product Title: Ceramic Window Tinting Film for All Vehicles

Ceramic film is a type of window tinting for vehicles or buildings that contains ceramic particles. This film is known for its superior heat rejection, UV protection, and clarity compared to traditional tint films. Coast2Coast offers high-quality pre-cut film that blocks out 83% of harmful UV rays and 99% of heat.

The benefits of ceramic window tint film include superior heat rejection, UV protection, reduced glare, and enhanced clarity. It also does not interfere with electronic signals and provides a sleek appearance for vehicles or buildings. Installing pre-cut window tint can be a bit easier since you don't have to cut the film yourself.

The step-by-step instructions for installing pre-cut window tint are as follows:

1. Clean the Windows: Start by thoroughly cleaning the windows with a solution of water and mild detergent to remove any dirt, dust, or grease. Dry the windows completely with a lint-free cloth.

2. Prepare the Window Tint: Lay out the pre-cut window tint film on a clean, flat surface, with the adhesive side facing up. Some pre-cut tint kits may come with a clear protective liner that needs to be removed before installation.

3. Mist the Tint Film: Use a spray bottle filled with a mixture of water and a small amount of dish soap to lightly mist the adhesive side of the pre-cut tint film. This will help facilitate easier application and reduce the risk of air bubbles.

4. Position the Tint Film: Carefully position the pre-cut tint film onto the inside of the window, starting at the top and aligning it with the top edge of the window. Take your time to ensure proper alignment and coverage.

5. Smooth Out Air Bubbles: Use a squeegee to press out any air bubbles and excess water from under the film, working from the center outwards. Apply firm pressure to ensure the tint adheres smoothly to the window.

6. Trim Excess Film (if necessary): Some pre-cut tint kits may require trimming to fit perfectly. If there is excess film around the edges, use a sharp utility knife to trim it, leaving a clean and even edge.

7. Heat Shrink the Film (if necessary): If the pre-cut tint film needs to be heat shrunk to conform to curved windows, use a heat gun to gently heat the film. Apply heat in a sweeping motion, gradually shrinking the film to fit the window's contours.

8. Final Trim and Press: After heat shrinking (if necessary), trim any remaining excess film and use the squeegee to press out any remaining air bubbles or wrinkles. Ensure the edges are securely adhered to the window.

9. Allow the Tint to Cure: Finally, allow the tint film to cure for at least 24 to 48 hours before rolling down the windows or cleaning them. This allows the adhesive to fully bond to the glass for a long-lasting installation.

Our Ceramic 2 PLY window tint film rejects up to 80% of the sun's transmittable infrared light, while also blocking 99% of UV Rays, significantly reducing fading and cracking of your vehicle's upholstery. It provides excellent skin, heat, anti-glare, and UV ray protection. The film is encoded with a double anti-scratch coating and available in the darkest percentages, still giving you up to 85% of full true view visibility and clarity.

Upgrade your vehicle with our premium pre-cut window tint films and experience the benefits of our superior ceramic film. Our full ceramic film provides unmatched clarity, durability, and superior heat blocking, elevating comfort, style, and privacy. Choose excellence with our pre-cut ceramic window tint.

Recommended tools for a proper install include a stainless steel Olfa Red Dot Pro Blade, a heat gun, a squeegee, a spray bottle with a soapy solution, and a lint-free microfiber rag. A clean workspace free of dust and dirt is also ideal for installation. For aftercare, avoid using Windex and instead use Spray Way Glass Cleaner, which is ammonia-free, to protect the tint film.

product information: